CarPro Gliss2.0 50ml Hyper Slick Coat Ceramic Coating

CarPro Gliss2.0 50ml Hyper slick coat ceramic coating

CarPro GLISS is an ultra-slick and extremely glossy ceramic nano-coating, designed as a top coat for CQuartz coatings, while it can also be used as a standalone protection and paint enhancement system.
Thanks to its formula with modified long-chain fluorocarbon polymers and advanced nanotechnology, it provides a very smooth texture, intense gloss, antistatic behavior and reduced dust retention.
At the same time, it enhances resistance to water spots and mineral stains, as well as the lifespan of an existing ceramic coating.

Features
• New-generation top coat
• Extremely slick feel on the surface
• Also suitable as a standalone nano-coating
• Antistatic action and reduced dust retention
• Adds thickness to the existing coating when used as a top coat
• Enhanced resistance to water spots and mineral stains
• Strong hydrophobic behavior
• Improves the gloss and durability of a ceramic coating

Kit contents
• 1 bottle CarPro GLISS 50ml
• 1 application block
• 4 4-inch suede microfiber applicators

Specifications
• Duration: 12 months +/-
• Coverage: 20 ml per layer +/-
• Water contact angle: 115°
• Recommended working temperature: 50F to 90F

Recommended surfaces
• Paint
• Metal
• Plastic
• Other non-porous surfaces

Directions for use
(For use as a primary coating)

• Wash with CarPro Reset, decontaminate and polish with CarPro Reflect.
• If heavier cutting is required, you can start with CarPro ClearCut
• Wipe with CarPro Eraser (the vehicle must be 100% dry and free of moisture or dew.)
• Draw two lines of product along the applicator with the suede wrapped around it.
• Apply evenly over the entire surface, approximately 2 ft x 2 ft at a time. (Any overlap from one section to another should be within a few minutes for even application)
• Add more product to the applicator as needed to maintain a wet, even application.
• GLISS will flash quickly and when a white haze forms, immediately wipe all residue using a microfiber towel.
• If the haze remains for too long, reapply and wipe immediately.
• If layering over, wait 1 hour between layers.
• If cured with IR Lamps, you can repeat immediately.
• Total curing time: 6 hours.

Directions for use
(For use as a top coat)

• Can be applied 4 hours or more after CQuartz.
• If cured with infrared Lamps it can be applied 45 minutes after CQuartz application