CarPro WheelX 500ml Wheel Cleaner

CarPro WheelX 500ml wheel cleaner

Upgrade your wheel cleaning with WheelX!

CarPro WheelX 500ml is a 1-step wheel cleaner that combines cleaning and iron removal in one formula.
Its fast-acting formula effectively removes brake dust, road dirt, oils, grease and other stubborn contaminants, making regular wheel cleaning easier.

Effective cleaning for wheels and surrounding areas
WheelX is suitable for use on wheels, calipers, wheel arches and lower body areas.
It can be used both for routine maintenance and for preparation before coatings.
It is safe for almost every wheel finish, including OEM, painted, powder-coated and chrome surfaces, as well as CQUARTZ coatings.

• 1-step wheel cleaner with iron-removal action.
• Removes brake dust, road dirt, oil, grease and other contaminants.
• Suitable for wheels, calipers, wheel arches and lower body areas.
• Ideal for regular maintenance or preparation before coatings.
• Safe for OEM, painted, powder-coated and chrome wheels.
• Compatible with CQUARTZ coatings.
• Helps remove old sealants from the surface.

Directions for use

• Use only on cool surfaces and out of sunlight.
• Spray WheelX generously onto the wheel and wheel barrel.
• Allow it to act for 1~2 minutes, but DO NOT allow it to dry on the surface.
• If necessary or preferred, agitate with the appropriate wheel brush.
• Rinse thoroughly.

Precautions
Not intended for use on bare aluminum, as discoloration may occur.
If required, proceed with caution.
In case of discoloration, polish with Metallicut by hand or machine to restore the finish.
DO NOT use in direct sunlight.
DO NOT use on hot surfaces.
DO NOT allow to dry on the surface.
Rinse in less than 5 minutes.
Do not mix with other chemicals.
Test on an inconspicuous area before use elsewhere.
Wear eye and skin protection where applicable.
Keep out of reach of children.
Store away from sunlight.

Frequently asked questions about CarPro WheelX:
Q: How do WheelX and IronX differ in performance?
A: WheelX not only dissolves brake dust and ferrous metals, but also dissolves dirt, grime, oil and more.
Q: What is the difference between WheelX and IronX?
Q:What is the difference between WheelX and IronX?
A: IronX has a pH of 7.0 (considered neutral), while WheelX has a pH of 5.7, which is slightly acidic.
A pH of 5.7 is considered the approximate pH of clean rainwater.
Q: Is CarPro WheelX stronger than other wheel cleaners on the market?
A: CarPro WheelX removes dirt, grime and brake dust more easily than any other wheel cleaner we have tested.
Q: Do I need to scrub my wheel with WheelX?
A: No! In fact, almost everything comes off without even touching it! Gone are the days when any effort was needed to clean wheels.
While it is always better to agitate them lightly, CarPro WheelX and water pressure alone will impress you with the results.
Q: Can I dilute WheelX?
A: If you dilute it, you will reduce its strength and effectiveness. It is ready to use.
Q: Is WheelX safe for carbon ceramic brakes?
A: CarPro states that WheelX is completely safe for carbon ceramic brakes when used according to the directions.
Q: What is the pH?
A: The pH is 5.7
Q: Is WheelX safe on all finishes?
A: WheelX is safe for almost every finish when used according to the directions.
Q: Is WheelX safe on raw aluminum?
A: On raw aluminum, we advise you to be careful and test in an inconspicuous area.
Q: Is WheelX safe on anodized aluminum?
A: On anodized aluminum we always recommend using a pH-neutral soap and testing it first on an inconspicuous area.